The function of frame in the structural design of shredder

    When the crusher stops to replace the lining plate, check the wear of the frame lining plate and rib guard plate. The frame is an important part of the double shaft shredder. In the production process, the commissioning and installation of the frame of the double shaft shredder is related to the production efficiency and service life of the crusher.

    The frame of the double shaft shredder is a frame fixed on the foundation with bolts and transmits the crushing force to the foundation. It is a rigid support for other parts of the double shaft shredder. The frame guard plate and rib guard plate welded on the inner wall of the frame are replaceable to prevent wear on the inner wall of the frame. The inner circle of the support sleeve installed on the conical processing surface on the upper part of the frame is machined with saw thread, so that the adjustment sleeve part can be adjusted. The heavy-duty spiral compression spring is installed at the lower part of the frame flange and placed on the support sleeve with studs, so that the crusher will not be damaged when foreign matters pass through the crushing chamber. When the foreign matter passes through the crushing chamber, the compression of the spring increases. The spring compression raises the support sleeve and the foreign matter is discharged. The locating pin extends from the upper surface of the frame to prevent the support sleeve from rotating. When the adjusting sleeve is raised or tilted, the locating pin acts as a guide to return the support sleeve to the normal working position. The frame bushing is closely matched with the frame and provides a bearing surface for the eccentric sleeve part. Tighten the bottom cover at the lower part of the frame with bolts to make the shredder have a lubrication channel here. The bottom cover also supports the thrust bearing and eccentric sleeve.


    When the crusher stops to replace the lining plate, check the wear of the frame lining plate and rib guard plate. The frame is an important part of the double shaft shredder. In the production process, the commissioning and installation of the frame of the double shaft shredder is related to the production efficiency and service life of the crusher. Zhengzhou Yiju machinery relies on strong technical force, perfect testing means, strict quality management and excellent processing equipment


    The quality of shredder equipment is not only in the design of equipment, but also the quality of equipment parts. Therefore, we must pay attention to these details when selecting equipment.

    Contact Us
    Mobile: 17355599875
    Tel: 0553-6762666
    Website:www.e-lions.com
    Address: Putuoshan Road, Pingqiao?
    Development Zone, Bowang Town, Bowang District
    Scan code and pay attention?
    to after-sales service
    ? 2021 Anhui Yuzhuo Machinery Co., Ltd ? copyright ? Wan?ICP Bei No. 2021009047-2?? ? ? Design and production: Anhui Zhengwei